Mizuno T24 Wedge Steel LH
Forged In Hiroshima Japan
One-piece Grain Flow Forged HD Boron at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.
Craftsman Refined Topline
Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.
Wrap-Arond Sole Relief
Increased sole relief to heel and toe across all 5 grind options.
Spin-Weighted Blade Design
A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.
QuadCut+ Groove
An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.
Wet Weather Performance
Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.
Loft Specific Profile
Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).
Satin Chrome, Denim Copper Or Raw
Raw steel comes without soft copper underlay – but will rust over time for a look requested by many of our tour players.
Club Specs
| Loft | Bounce | Grind | Lie Angle | Length | Hand |
|---|---|---|---|---|---|
| 46° | 8° | S-Grind | 63.0 | 35.5 | RH |
| 48° | 10° | S-Grind | 63.0 | 35.5 | RH |
| 50° | 8° | S-Grind | 63.0 | 35.25 | RH/LH |
| 52° | 10° | S-Grind | 63.0 | 35.25 | RH/LH |
| 54° | 8° | D-Grind | 63.0 | 35.25 | RH/LH |
| 54° | 10° | S-Grind | 63.0 | 35.25 | RH/LH |
| 56° | 6° | C-Grind | 63.0 | 35.25 | RH/LH |
| 56° | 8° | V-Grind | 63.0 | 35.25 | RH/LH |
| 56° | 10° | D-Grind | 63.0 | 35.25 | RH/LH |
| 56° | 12° | S-Grind | 63.0 | 35.25 | RH/LH |
| 58° | 4° | X-Grind | 63.0 | 35.25 | RH/LH |
| 58° | 8° | C-Grind | 63.0 | 35.25 | RH/LH |
| 58° | 10° | V-Grind | 63.0 | 35.25 | RH/LH |
| 58° | 12° | D-Grind | 63.0 | 35.25 | RH/LH |
| 60° | 6° | X-Grind | 63.0 | 35.25 | RH/LH |
| 60° | 10° | C-Grind | 63.0 | 35.25 | RH/LH |
| 60° | 12° | V-Grind | 63.0 | 35.25 | RH/LH |
Grind Details
|
|
|
|
|
| S-Grind: High bounce with limited relief. For full shots. | D-Grind: Mid bounce with moderate relief for gentle manipulation of the clubhead. | C-Grind: Mid/High bounce with generous relief for a wide range of players and conditions. | V-Grind: High bounce with agressive relief for versatility and a steeper attack angle. | X-Grind: Low bounce with agressive relef for veratility and shallow attack angle. |
Shaft And Grip Details
True Temper Dynamic Gold Tour Issue: Dynamic Gold Tour Issue is the Gold Standard by which all other iron shafts are measured. It is the most successful shaft in the history of golf and still continues to dominate on professional tours each and every year. Dynamic Gold Tour Issue is a tour-weighted shaft that is designed for players seeking a low, penetrating ball flight for optimum control and accuracy. Our Tour Issue shafts hold the industries tightest weight tolerance for the exacting performance demanded by the best players.
Golf Pride Z-Grip: The Z-Grip cord is the firmest cord grip available from Golf Pride. Combining two layers of texturing for feedback and control, the Z-Grip features a deep “Z”-shaped texture pattern that winds vertically around the grip for control, while a heavy cord texture throughout provides moisture management.